Nickel Zinc Iron Oxide Nanopowder

The High-purity products are prepared by using analytically pure chemical reagent as raw materials, and washed by distilled water. Its purity is higher than 99.5%. All our high-purity products are produced by our well-known research universities and national laboratories, not produced by ordinary manufactories. Ordinary products are prepared by using fine chemical raw materials, purity is up to 98-99%. 

The following are the chief applications of nickel zinc iron oxide nanoparticles: 

Preparation of nickel cermet which is used as the anode layer of solid oxide fuel cells (SOFC) In lithium ion micro batteries as lithium nickel zinc iron cathode In plastics, textiles, electro chromic coatings In nanofiber, nanowire, alloys and catalyst applications.

Related Products :

• Barium Iron Oxide (BaFe12O19) Nanopowder / Nanoparticle (BaFe12O19, 99.5%, 60 nm)
• Cobalt Iron Oxide (CoFe2O4) Nanopowder / Nanoparticle (CoFe2O4, 99.9%, 30 nm)
• Manganese Iron oxide (MnFe2O4) Nanopowder / Nanoparticle (MnFe2O4, 98.5%, 60 nm)
• Manganese Iron Oxide MnFe2O4 Nanopowder / Nanoparticles (MnFe2O4, 99.99%, 28 nm)
• Nickel Iron Oxide (NiFe2O4) Nanopowder / Nanoparticle (NiFe2O4, 98%, 30 nm)
• Nickel Iron Oxide NiFe2O4 Nanopowder / Nanoparticles (NiFe2O4, 99.99%, 20 nm)
• Nickel Zinc Iron Oxide Nanopowder / Nanoparticle (Ni0.5Zn0.5Fe2O4, 99.995%, 10-30 nm)
• Nickel Cobalt Iron Oxide Nanopowder / Nanoparticle (Ni0.5Co0.5Fe2O4, 99.995%, 40 nm)
• Strontium Iron Oxide Nanopowder / Nanoparticle (SrFe12O19, 99.5%, 60 nm)
• Zinc Iron Oxide (ZnFe2O4) Nanopowder / Nanoparticle (ZnFe2O4, 98.5%,10- 30 nm)
• Zinc Cobalt Iron Oxide Nanopowder / Nanoparticle (Zn0.5Co0.5 Fe2O4, 99.995%, 40 nm)
• Zinc Manganese Iron Oxide Nanopowder / Nanoparticle (Zn0.5Mn0.5 Fe2O4, 99.995%, 30-60nm)